77
How to Arm and Disarm Alarm
How to Disarm
If you miss any of these steps or type in the wrong code please restart to step 1.
-
Proceed to the alarm panel located by the entrance or exit
-
Click the “Arm Disarm” button
-
Insert your code in the number panel (your code is private and should not be shared)
-
Click the “Enter” button
-
The panel will then ask you to “Select Partition”
-
Select “This Partition” by clicking the “Enter” button
-
The panel should ring and read “Disarmed: Ready”
*Submit a ticket through HappyFox, if you do not have a code.
How to Arm
If you miss any of these steps or type in the wrong code please restart to step 1.
-
Please ensure you are the last person in the building, then close all entry and exit doors.
-
Proceed to the alarm panel located by the entrance or exit.
-
Click “Arm Disarm” button
-
Insert your code in the number panel (your code is private and should not be shared) *
-
Click “Enter” button
-
Then please wait while arming until the panel rings and reads “Armed”
-
The panel will give you 59 seconds to exit the premises before setting the alarm.
-
Please ensure the door you use to leave the building is closed after you exit.
*Submit a ticket through HappyFox, if you do not have a code.
